We constantly get calls from manufacturers and out-of-state building contractors interested in expanding into the South Florida area to sell building products and materials, or in the case of contractors, wanting to offer construction services. The conversation always involves the question of what the building permitting process is like in Broward, Miami-Dade and Palm Beach Counties. The simple answer is that it can be very complex depending on what you want to have permitted.
Over the past ten years we have had at at least a dozen Clients, the majority being building contractors, that set-up offices in the area without doing their due diligence on the viability of their contracting business, and the impact that the building permit process would have on the success of their business. They have all since closed their doors. Some purchased the rights to sell a construction product in the State not realizing that the product had State of Florida product approval, but was not approved for use in the high velocity hurricane zone (HVHZ) area of South Florida.
I highly recommend that manufacturers of building products, and building contractors do their home work on the permitting process in Florida, and especially the South Florida area. Review the Florida Building Code and become familiar with those sections referring the the high velocity hurricane zone. I would also recommend that you become familiar with the local Codes and Ordinances of the Counties and Cities you want to target for sales. They can be very different. Even some experienced and seasoned local contractors refuse to do work in some Cities and Counties because of the tedious, time consuming and aggravating process of getting a building permit issued.
Feel free to call us if you have questions about the building permitting process in South Florida. Specifically, Broward, Miami-Dade and Palm Beach Counties. We may not have all the answers, put we can point you in the right direction.
The new 2010 Florida Building Code will be implemented on March 15, 2010, and it includes significant changes to areas of South Florida. Specifically, the High Velocity Hurricane Zone Areas have been increased to include a much larger land mass and now covers areas that were not in the 2007 Florida Building Code. How will these changes affect contractors, manufacturers and permitting in South Florida? Until the changes are fully implemented nobody really knows for sure.
Tom Johnston, president of the International Hurricane Protection Association has the opinion that, “this adoption of ASCE 7-10 places an unnecessary burden on manufactures to update their product approvals to reflect a new code version when very little material differences have occurred. In addition, a net result of slightly less stringent design pressures is not a step in the right direction. All of this occurring during these difficult economic times makes this code modification even more of an ill conceived decision.”
According to the Home Builders Assocition, for central and south Florida the WBDR is increased and now will include all of the following; Miami-Dade, Broward, Monroe, Palm Beach, St. Lucie, Indian River, Brevard, Volusia, Pinellas, Manatee, Sarasota, Polk, Charlotte, Lee, Glades, Hardee, Hendry, Okeechobee, and Highlands. The result of these changes will mean there will be new areas with requirements for opening protection in accordance with Chapter 16 of the code.
There are also changes to the Energy Code which will affect Miami-Dade, Broward and Palm Beach Counties, but it seems, that the largest impact of the new Code from a cost and procedural stand point, will affect Central Florida more so than South Florida. By no means does that diminish the increased costs for building permitting. Procedural changes that building departments will institute will require contractors to produce additional paperwork and forms, and then there is the increased costs incurred by manufactures that will be pasted on to consumers. Let’s not forget the additional costs that the local architects and engineers will need to pass on the their Clients.
To summarize, it is a good thing that the HVHZ areas have been increased. Yes! The Wind Born Debri Regions in the 2007 and earlier Codes never made any sense, but have the other changes made buildings any safer? Or, have the changes just added more costs to the consumer, created more bureaucratic procedures and paperwork, and made the process of designing, building and permitting a construction project more of a nightmare that it already is, in Miami-Dade, Broward and Palm Beach Counties? Only time will tell!
The hurricane seasons over the past couple of years have been pretty quite here in South Florida and another season is slowly approaching. Will this be the year that we get hit? Nobody knows but it is best to be prepared. If your home doesn’t have any form of hurricane protection, you might want to consider making the investment. Now is a good time. Prices are low and it is a very competitive market. Please visit our Helpful Links page for a list of contractors.
If you are a “do it yourself” type of person, you may need a little help with the permitting, and Permit Source, Inc. offers home owner’s assistant in preparing your permit package to submit to the building department. We make sure that you have all the proper Product Approvals/Notice of Acceptances, and that the forms, tables and charts are completed properly. If your building department requires elevations and detailed floor plans we can perform a site survey and prepare the required drawings. No mater what you are planning to do; hurricane panels, hurricane shutters or impact windows, when can assist you.
We are now well into the the 2010 hurricane season. Nothing major has occurred affecting South Florida, but it only takes that one storm. After living through an evening in August of 1992 with Andrew pounding on the doors, and the boarded-up windows of the home I was staying in west Miami-Dade, I am fully aware of the destruction that one storm can do. A long, and what seemed to be a never ending evening in darkness hearing what sounds like the thunder of a train going by for hours is something you never forget.
Back then, the South Florida Building Code was about as thick as a paperback romance novel. Hurricane Andrew put and end to that real fast! Now, almost twenty years later, the Florida Building Code fills a cabinet shelf with volumes and volumes of 3″ loose leaf binders. Like any government generated rules and regulations some is genuine and serves the purpose it was created for, but other portions are created with political motivations. That leads me to the following observations. As you can see by the map to the above left, the yellow areas are considered, high velocity hurricane zones. The yellow areas encompass all of Miami-Dade County and Broward County, and a portion of Palm Beach County. Within the yellow areas there are degrees of wind velocity. They range from 120 mph -150 mph, but what is 30 mph between friends. If you look closely, the highest wind velocities are at the tip of Florida, concentrated on the eastern coast.
I am not a scientist, an engineer or a meteorologist but I am a thinker. Hurricanes have hit Florida from the Gulf as will as the Atlantic. Wilma in 2005, which I had the pleasure of experiencing, hit Florida on the Gulf side and went northwest through Florida. They also just don’t hit the tip of Florida as the wind borne debris map seems to indicate. When you look at the below satellite photos of Andrew and Wilma, and then compare it the the high velocity hurricane zones you are probably scratching your head.
Hurricane Andrew Satellite Picture Timed
Hurricane Wilma 2005
So! My point is, get prepared and be prepared no matter where you live in Florida. Hurricanes are not going to follow maps created by bureaucrats. Also! It’s a little late now, but in the future, if you are doing any construction, build it to withstand 150 mph winds. You can always build to exceed Code!
Many contractors, as well as, homeowners, think that these two documents are interchangeable. They are not! Permit Source has had Clients, and the key word here is had, that looked at South Florida as a cash cow based on using the Product Approval document issued by the State of Florida. Basically, they did not do their homework.
The State issued Product Approval indicates that a product is approved for use as a construction material within the State of Florida. But! That approval does not mean that it can be used in a high velocity hurricane zone. There may be an exclusion in that approval that indicates that it is not approved for use in those areas. Those areas just happen to be Miami-Dade, Broward and parts of Palm Beach County.
The Miami-Dade issued Notice of Acceptance, or N.O.A., is specific to the high velocity hurricane zones. You can use and submit the State of Florida Product Approvals but you need to be extra careful that you make sure the product is approved for use in a high velocity hurricane zone. For anyone out side of those areas you can go to Florida Building Code On Line and download the State issued Product Approvals.
For anyone lucky enough to be in the high velocity hurricane zone you can go to Miami-Dade Product Control to download the N.O.A.’s you need. When I say lucky, I am not being facetious! These code requirements will prevent the catastrophic damage that was seen during hurricane Andrew and Katrina.
All these links, as well as, additional resources are available on the Permit Source website and you are free to comment and ask questions on our blog.
We constantly get calls from manufacturers and out-of-state building contractors interested in expanding into the South Florida area to sell building products and materials, or in the case of contractors, wanting to offer construction services. The conversation always involves the question of what the building permitting process is like in Broward, Miami-Dade and Palm Beach Counties. The simple answer is that it can be very complex depending on what you want to have permitted.
Building Permit, Building Permit Processing, N.O.A., Product Approval | Bob, 28 Aug 14 | 
Comments Off on Manufacturers and Contractors Beware! 
